SatLab SLT2 - Page 113

Total Station Manual
-
112
-
○
2 Input the name of first
point in “PT1” field.
※ There are four ways to get
the known point for
BRG-BRG calculation.
Please refer to the step ②
in the “COGO Traverse”.
Input
name of
first point
○
3
Move the focus to “AZ1”
by using [▼] and input the first
bearing after set first point.
[▼]
+
Input first
bearing
○
4 Move the focus to “PT2”
by using [▼] to setting second
point.
[▼]
+
Set second
point
○
5
Move the focus to “AZ2”
by using [ ▼ ] and input the
second bearing after set
second point.
[▼]
+
Input
second
bearing
○
6 When all of the data are
entered correctly, press
[F2](Result) to calculate the
intersection point and show
the result.
Input the name of result point
[F2]