Total Station Manual
P1 First point, origin of local coordinate system.
P2 Second point
P3 Third point
P4 Measured point. This point is prob- ably not located on the plane.
P5 Footprint point of the perpendicular vector from P4 to the defined plane. This
point is definitely located on the defined plane.
d+ Perpendicular distance from P4 to the plane.
Functions that can be done by the software buttons:
[New-tar]: To record and save the intersection point and to proceed to measure a
new target point.
[Stakeout]: To display stake out values for the intersection point.
[New-sur]: To define a new reference plane.
[Done]: to go back to the program menu.
To Next Page
Loading...