SatLab SLT2 - Page 174

Total Station Manual
-
173
-
Key Beep
The beep is an acoustic signal after each key stroke.
On: Enable beep.
Off: Disable beep.
Sector Beep
On: Sector Beep sounds at right angles(0°, 90°, 180°, 270°or
0, 100, 200, 300 gon).
Off: Sector Beep disabled.
Tilt
On: Biaxial compensation enable.
Off: Tilting compensation disable.
X Only：Single axis compensation enable.
Hz increment
Right: Set horizontal angle to clockwise direction measurement.
Left: Set horizontal angle to counter-clockwise direction
measurement.
V-Setting
Zenith: Zenith = 0°; Horizon = 90°.
Horiz.0: Zenith = 270°; Horizon = 0°。
Vert90: Zenith = 90°; Horizon = 0°;