Total Station Manual
Sets the units shown for all distance and coordinate related fields.
Meter Meters [m].
US-ft US feet [ft].
INT-ft International feet[fi].
ft-in1/8 US feet-inch-1/8 inch [ft].
Sets the number of decimal places shown for all distance fields.
This is for data display and does not apply to data export or
storage.
3Display distance with three decimals.
4Display distance with four decimals.
Sets the units shown for all temperature fields.
℃Degree Celsius.
℉Degree Fahrenheit.
Sets the units shown for all pressure fields.
hPA hecto-Pascal.
mmHg Millimeter mercury.
inHg Inch mercury.
Sets if the code will be used for one, or many, measurements.
Rec/Reset The code is cleared after ALL or REC.
Permanent The code remains after measurements.
30min Auto power off after 30min’s no operation.
Off Disable auto-off.
To Next Page
Loading...