SatLab SLT2 - Page 97

Total Station Manual
-
96
-
○
3
Press [F2] to select the
Polygonal tie distance.
[F2]
○
4 Start to measure the first
target point. Aim at the first
target point and press [F1](ALL)
or [F2](DIST) + [F3](REC) to
finishing measurement. ※
1
PAGE1
Press [F1]
or
[F2] + [F3]
○
5 Start to measure the first
target point. Aim at the first
target point and press [F1](ALL)
or [F2](DIST) + [F3](REC) to
finishing measurement. ※
1
PAGE1
Press [F1]
or
[F2] + [F3]