1. Use the and buttons to
move the cursor to “Packets/Ip:”
then press the button.
2. Use the and buttons to
select the column to edit and use
the and buttons to
change the number of packets per
frame (1 –7), then press the
button to save the selection.
1. Use the and buttons to
move the cursor to “DiffServ:” then
press the button.
2. Use the and buttons to
select the desired differentiated
services (“Default”, “AF11”, “AF12”,
“AF13”, “AF21”, “AF22”, “AF23”,
“AF31”, “AF32”, “AF33”, “AF41”,
“AF42”, “AF43”, “EF”), then press
the button to save the
selection.
To Next Page
Loading...
