Sencore MRD 3187B - Page 143

MRD 3187B - User Manual
Page 142 (245)
Note: Use the same steps to set
the PID value for PIDs 2-10.
4. Use the and buttons to
move the cursor to “PID 1:”, then
press the button.
5. Use the and buttons to
set the PID 1 to “Enabled” or
“Disabled”, then press the
button to save the selection.
Note: Use the same steps to
Enable or Disable PIDs 2-10.
Transmit 1 PIDs
►PID 1:0x0000
PID 1:Enabled