MRD 3187B - User Manual
Page 181 (245)
2. Use the
and
buttons to
change the character and then the
and
buttons to move to the
next character.
3. Press the
button when finished,
to save the Profile.
Loading / Deleting a Stored Profile
1. Use the
and
button to move
the cursor to the stored profile
(“profile1” in the example) then press
the
button.
2. Use the
and
buttons to select
“Apply” or “Delete”, then press the
button.
Hardware
This lists the hardware of the unit and options that are installed along with the option
slot locations (RDS-Slot). The “0” is used if the hardware is not related to a particular
RDS or slot location. Slot “5” (either 1-5 or 2-5) is the AVPU (decoder) location. The
8722 (BISS-E) is located at 3-2.
1. Use the
and
button to move the
cursor to “Hardware” then press the
button.
2. Use the
and
buttons to select a
hardware unit and press the
button
to see details about the selected
hardware.
3. Use the
and
buttons to scroll up
and down through the details. Press the
button to return to the Hardware list.
Temperature
This lists the temperature inside the MRD 3187B unit in both
o
C and
o
F.
0-0
Controller
P/N:
Assembly 3
Hardware
►0-0 Controller
1-0 Backplane
2-0 Backplane
System
Versions
Profiles
►Hardware
Profiles ←→
Save Current Profile
Stored Profiles
Apply Delete
Profiles
Save Current Profile
Stored Profiles
► profile1
Profiles ←→
►Name:
---------------
Stored Profiles
profile1
To Next Page
Loading...
