MRD 3187B - User Manual
Page 40 (245)
DTVCC Closed Captions
Note: This option will only be available if the TYPE of overlay is set to,
“Closed Caption” and the “Overlay” is set to “DTVCC.”
1. Use the and buttons to
move the cursor to “DTVCC Srvc:”
then press the button.
2. Use the and buttons to
select the desired number of closed
caption to view (1-7), then press the
button to save the selection.
Overlay (Table)
Note: This menu changes depending on which overlay is set in “Overlay”.
1. Use the and buttons to move
the cursor to “Overlay:” then press the
button.
2. Use the and buttons to select
the appropriate type of overlay (“PSI
PAT”, “PSI PMT”, “ATSC MGT”, “ATSC
STT”, “ATSC TVCT”, “ATSC EIT”,
“ATSC EPG”), then press the
button to save the selection.
Screen Interaction
This mode allows the user to page through the on-screen PSI/ATSC tables.
Note: This option will only be available if the type of overlay is set to, “Table.”
1. Use the and buttons to
move the cursor to “Screen
Interaction”, then press the
button.
2. While this mode is enabled, the
, , , and buttons will
control the on-screen PSI/ATSC
tables. To exit the, “Screen
Interaction” mode press the
button.
Coordinated Universal Time Offset
1. Use the and buttons to
move the cursor to “Utc Offset:”
then press the button.
2. Use the and buttons to
change to the appropriate offset,
then press the button to save
the selection.
Note: The UTC values and their offsets are listed in Appendix E.
Overlay 1
Screen Interaction
►Utc Offset:-06:00
Central
Overlay 1
Type: Table
Overlay: PSI PMT
►Screen Interaction
Overlay 1
Type: Table
►Overlay: PSI PAT
Screen Interaction
Overlay 1
Type:Closed Caption
Overlay:DTVCC
►DTVCC Srvc:1
To Next Page
Loading...
