MRD 3187B - User Manual
Page 57 (245)
Overlay (Table)
Note: This menu changes depending on which overlay is set in “Overlay”.
1. Use the and buttons to move
the cursor to “Overlay:” then press the
button.
2. Use the and buttons to
select the appropriate type of overlay
(“PSI PAT”, “PSI PMT”, “ATSC MGT”,
“ATSC STT”, “ATSC TVCT”, “ATSC
EIT”, “ATSC EPG”), then press the
button to save the selection.
Screen Interaction
This mode allows the user to page through the on-screen PSI/ATSC tables.
Note: This option will only be available if the type of overlay is set to, “Table.”
1. Use the and buttons to
move the cursor to “Screen
Interaction”, then press the
button.
2. While this mode is enabled, the
, , , and buttons
will control the on-screen
PSI/ATSC tables. To exit the,
“Screen Interaction” mode press
the button.
Coordinated Universal Time Offset
1. Use the and buttons to
move the cursor to “Utc Offset:”
then press the button.
2. Use the and buttons to
change to the appropriate offset,
then press the button to save
the selection.
Note: The UTC values and their offsets are listed in Appendix E.
Overlay (Service)
Note: This option only displays the Service
Info.
Overlay (Subtitle)
This overlays the DVB Subtitles. The subtitle is selected by choosing the
language to display. Only the available languages that are present can be
selected. When an input without DVB Subtitles is used, no language can be
selected.
Overlay 1
Type:Service
►Overlay:Service Info
Overlay 1
Screen Interaction
►Utc Offset:-06:00
Central
Overlay 1
Type: Table
Overlay: PSI PMT
►Screen Interaction
Overlay 1
Type: Table
►Overlay: PSI PAT
Screen Interaction
To Next Page
Loading...
