1. While the cursor is on “Output
Format:” press the button to
change the display format.
2. Use the and buttons to
change from any of the format
settings.
3. Press the button to save the
settings.
3. Use the and button to move
the cursor to “SFD Location:” and then
press the button.
4. Use the and buttons to
select one “Top-Lt”, “Mid-Lt”, “Btm-Lt”,
“Top-Rt”, “Mid-Rt”, “Btm-Rt”, “Top-Ctr”,
“Mid-Ctr”, “Btm-Ctr”, then press the
button to save the settings.
To Next Page
Loading...
