Sennheiser CHG 2W - Charging the Table Stand Via USB; Charging the Table Stand Using the CHG 2 W Wireless Charging Base

SL Tablestand 133-S DW
100
Charging the table stand via USB
To charge the table stand via USB:
►
▷ Connect the USB cable’s Micro-USB plug to the Micro-USB socket of
the accupack.
▷ Plug the other end of the USB cable into a USB power supply unit.
The charge level LEDs indicate the charge level.
Charging the table stand using the CHG 2W wireless charging base
To charge the table stand using the CHG 2W charging base:
►
▷ Place the table stand on the CHG 2W charging base in the area marked.
If the table stand is positioned correctly on the charging surface, the
alignment LED lights up green.
The LEDs on the CHG 2W charging base flash blue during charging.
You can find more information about the CHG 2W wireless charging base
under „The CHG 2W charging base”.