SL Rack Receiver DW
64
Attaching the mounting angles
The mounting angles are designed to help protect the operating elements
from damage or deformation, e.g. if the receiver is dropped. We therefore
recommend always attaching the mounting angles, even if you do not want
to mount the receiver into a rack.
To fasten the mounting angles:
▷ Unscrew and remove the two recessed head screws on each side of the
receiver.
▷ Secure the mounting angles to the sides of the receiver using the pre-
viously removed recessed head screws.
Make sure that the angled ends of the mounting angles point forward.
►
To Next Page
Loading...
