Recommendations on antenna mounting
38
Option 1: Connecting the AWM 2 or AWM 4 antenna
wall mount directly to the receiver(s)
You can connect one receiver directly to one AWM 2 antenna wall mount
or you can connect two receivers directly to one AWM 4 antenna wall
mount.
►
•For the AWM 2 you can use Sennheiser CL 5/10/20 extension cables.
•For the AWM 4 you can use Sennheiser CL 1/5/10/20 PP extension ca-
bles.
Observe the following information when using extension cables:
Signal loss due to extension cables
In this scenario, using extension cables for remote antenna mounting re-
sults in a loss of transmission power, depending on the cable length.
You can compensate this signal loss by configuring the transmission pow-
er of the receiver accordingly.
▷ Observe the following minimum transmission power settings (SL Rack
Receiver DW: System Settings menu -> RF Power) for the respective
cable lengths:
• Cable length of 5 m -> at least level 1
• Cable length of 10 m -> selected level +1, at least level 2
• Cable length of 20 m -> selected level +1, at least level 3
• Cable length of 25 m and longer -> selected level +2, at least level 4
SL Rack Receiver DWSL Rack Receiver DW SL Rack Receiver DW
Link I - Ant ILink I - Ant II Link II - Ant ILink II - Ant II
AWM 4AWM 2
CL 1 PP (1 m / 3.3 ft)
CL 5 PP (5 m / 16.4 ft)
CL 10 PP (10 m / 32.8 ft)
CL 20 PP (20 m / 65.6 ft)
CL 5 (5 m / 16.4 ft)
CL 10 (10 m / 32.8 ft)
CL 20 (20 m / 65.6 ft)
To Next Page
Loading...
