The CHG 2 charger
154
Charging the accupack in the CHG 2 charger
To charge an accupack in the CHG 2 charger:
►
▷ Insert the transmitter with the accupack installed and with the
charging contacts facing downwards into the charger.
Make sure to insert the transmitter the correct way round: The STAND-
BY button of the bodypack transmitter has to point in the direction of
the charger's charge status LED. The charge status LED lights up red
when the accupack is being charged. The charge status LED lights up
green when the accupack is fully charged.
To Next Page
Loading...
