Sennheiser CHG 2W - Starting up and Using the Boundary Microphone; Removing;Inserting the BA 40 Accupack

The SL Boundary 114-S DW
113
Starting up and using the boundary microphone
Removing/inserting the BA 40 accupack
The included BA 40 accupack is used to power the boundary microphone.
The accupack must be charged before the first use. The accupack can ei-
ther be charged with the optional CHG 2W charging base (see „The CHG
2W charging base”) or with the supplied USB cable.
To remove the accupack:
►
▷ Pull the unlock button away from the accupack and pull the accupack
out of the compartment.
To insert the accupack:
►
▷ Slide the accupack into the compartment with the correct orientation
until the unlock button locks into place.
The charge level LEDs light up briefly and indicate the charge level.