The SL Bodypack DW
94
To insert the accupack or the battery compartment:
▷ Slide the accupack or the battery compartment onto the handheld
transmitter as shown.
The accupack or the battery compartment locks into place with an au-
dible click.
►
Connecting the clip-on microphone or the headset microphone to the
bodypack transmitter
Only connect the clip-on microphone or the headset microphone recom-
mended by Sennheiser. These microphones are optimized for the
bodypack transmitter.
►
▷ Connect the jack plug of the clip-on microphone or headset micro-
phone to the 3.5 mm jack socket (MIC/LINE) of the bodypack transmit-
ter.
▷ Lock the jack plug by screwing down the coupling ring.
When the jack plug is not firmly locked, crackling noise can appear in
the audio signal.
Alternatively, you can use a 3.5 mm jack cable to connect a line
source (e.g. a smartphone, tablet or laptop) to the bodypack transmit-
ter.
To Next Page
Loading...
