Installing two receivers next to one another in a fixed location 70
GA 4 mounting kit 71
Mounting the jointing plate and the mounting angles 72
Connecting the AWM 2 / AWM 4 remote antenna to the receiver 72
Displays on the receiver’s display panel 73
Home screen 73
Secondary home screen 75
Using the operating menu of the receiver 76
Using the buttons for navigation 76
The menu structure of the receiver 77
The Audio Settings menu 78
The System Settings menu 78
The Network Settings menu 79
The Device Identification menu 80
The Help menu 80
The SL Handheld DW 81
Product overview 82
Displays on the display panel of the SL Handheld DW 84
Starting up and using the handheld transmitter 84
Removing/inserting the accupack or the optional battery pack 84
Switching the handheld transmitter on and off 86
Meaning of the status LED on the handheld transmitter 87
Using the handheld transmitter 88
The SL Bodypack DW 89
Product overview 90
Displays on the display panel of the SL Bodypack DW 92
Starting up and using the bodypack transmitter 93
Removing/inserting the accupack or the optional battery pack 93
Connecting the clip-on microphone or the headset microphone to the bo-
dypack transmitter 94
Switching the bodypack transmitter on and off 95
Meaning of the status LED on the bodypack transmitter 96
SL Tablestand 133-S DW 97
Product overview 98
Starting up and using the table stand 99
Removing/inserting the BA 40 accupack 99
Charging the table stand via USB 100
Charging the table stand using the CHG 2W wireless charging base 100
Charging the table stand with a wireless Qi charging base from a third-par-
ty manufacturer 101
Meaning of the charge level LEDs on the table stand 102
Connecting the goose neck microphone 102
Switching the table stand on/off 103
To Next Page
Loading...
