4.2 Creating Method Files
4-11
CBM-20A/20Alite
4
2
Click on the right of the current method filename.
The "Load File" window is displayed.
3
Select a file from the list on the left of the window.
The name of the selected file is displayed in the [File Name] field.
Up to 20 method files can be saved. "Method00" to "Method19" are used as the
default filenames. (The numbers in front of the files are the file numbers; file
numbers 0 to 19 are allocated to the files.)
Changing filenames:
The names of the method files can be changed. Select the [File Name] field and
input a filename of no more than 8 characters.
4
Input a comment if necessary.
Comments can contain up to 250 characters.
5
Click .
The window closes and the name of the selected file is displayed in the "Analysis" tab
page as the current method.
Click to close the window without loading a file.
For details on , refer to "5.7 Managing Files" P. 5-25.
To Next Page
