EasyManua.ls Logo

Shimadzu CBM-20A - 7.5 Validation: System Controller; 7.7 If Validation Fails

Shimadzu CBM-20A
412 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.2 Component Parts
1-5
CBM-20A/20Alite
1
1.2 Component Parts
This instrument consists of the standard parts listed below. Check the parts against this list
after unpacking.
The standard parts provided depend on the power supply voltage. (See below.) After
unpacking, verify that the correct types and quantity of parts have been provided.
For S228-45012, the 2-digit numbers in the remark column in the table below indicate the
power supply voltages for the part. -31, -41 indicates use with a 100 V power supply, -32, -42
is a 120 V power supply, and -38, -48, -58 a 220-240 V power supply.
These 2-digit figures refer to the last two digits in the product number of the instrument. -31,
-41 is for products destined for Japan, while -32, -42 and -38, -48, -58 are for use in other
countries.
CBM-20A (S228-45012)
CBM-20Alite (S228-45011)
Part Part No. Q’ty Remark
CBM-20A -
Instruction manual S228-30846 1 -31, -41 only
Instruction manual S228-30847 1 -32, -42, -38, -48, -58 only
Bus cable S228-41977 1
Power cable S071-60821-08 1 -31, -41, -32, -42 only
Power cable S071-60825-51 1 -38, -48, -58 only
AC Power cable (for China) S465-06046 1 -46 only
LAN cable
S228-61083-91 1 Straight cable -31, -32, -38 only
S228-61083-41 1 Straight cable -41, -42, -48, -58 only
AC remote cable S228-35071-91 1 For multiple terminal box
CD-ROM S228-42654-91 1
Part Part No. Q’ty Remark
CBM-20Alite -
Instruction manual S228-30846 1 -31, -41 only
Instruction manual S228-30847 1 -38, -48, -58 only
Control cable S228-41797-91 1
LAN cable
S228-61083-91 1 Straight cable -31, -32, -38 only
S228-61083-41 1 Straight cable -41, -42, -48, -58 only
CD-ROM S228-42654-91 1

Table of Contents

Other manuals for Shimadzu CBM-20A

Related product manuals