Shimadzu CBM-20A - Shutdown and Startup Settings; Displaying the Queue Tab Page

5. Application Operation
5-14
CBM-20A/20Alite
5.5 Shutdown and Startup Settings
If shutdown and startup are entered in the analysis queue, and analysis for that queue is
complete, the system will automatically perform shutdown operations, and prepare for the
next analysis. These parameters are entered in the "Queue" tab page.
The procedure for inserting shutdown and startup is described below.
5.5.1 Displaying the "Queue" Tab Page
Shutdown and startup settings are performed in the "Queue" tab page.
1
Click the [Queue] tab.
The "Queue" tab page is displayed.
For details on the analysis-queue table on the left of the page, refer to "5.4 Analysis Using
Queues" P. 5-10.