Shimadzu CBM-20A User Manual

4. Basic Operation
4-16
CBM-20A/20Alite
4.2.4 Parameters for the Autosampler
Enter the autosampler parameters, such as the needle stroke and the sampling speed.
The displayed parameters vary with the type of autosampler connected.
For details on the various parameters and the setting ranges, minimum units, units, and default
values for the parameters, refer to "5.12.2 Autosampler" P. 5-74.
1
Click in the "Analysis" tab page.
The "Autosampler" tab page in the "Method Parameter" window is displayed.
2
Set the method parameters for the autosampler.
3
Click .
The "Autosampler" tab page in the "Configuration Parameter" window is displayed.

Shimadzu CBM-20A Specifications

General

Brand	Shimadzu
Model	CBM-20A
Category	Controller
Language	English