Shimadzu CBM-20A - Chapter 3 Preparation; Managing Several Systems as One Group

3. Preparation
3-2
CBM-20A/20Alite
3.1 Managing Several Systems as One
Group
CBM-20A/20Alite controller can monitor several system controllers via the network.
More specifically, the following operations are possible.
• The status of analysis execution for several systems can be monitored.
• System checks can be executed and the results can be viewed.
• Information on consumable parts in several systems can be displayed in list format and
managed centrally.
• All the systems in one workplace or one group can be managed together.
• Management of system users is possible in group units.
Groups are created to use these functions. One group can contain a combined total of up to
10 CBM-20A/20Alite System Controllers and SPD-M20A/M30A PDA Detectors.
Intranet Configuration Example
Fig. 3.1