3.1 Managing Several Systems as One Group
3-3
CBM-20A/20Alite
3
In order to configure group settings, all the CBM-20A/20Alite System Controllers and SPD-
M20A/M30A PDA Detectors must be in the same subnet, and the same group name must be
set in the "Group Settings" application window. Consider factors such as the number of users
for each system when deciding the group configuration.
Both network and group settings are required in order to use the system controller.
When changing network settings without connecting to the network, use the [Calibration]
menu of the LC-20AB/20AD/20AT, SIL-20A/20AC, SPD-20A/20AV or by using terminal
software via an RS-232C connection.
"5.9 Managing Groups" P. 5-39
To Next Page
Loading...
