Introduction
X
CBM-20A/20Alite
Precautions for Instrument Inspection, Maintenance, Adjustment and Care
WARNING
• Unplug the instrument before inspection, maintenance,
or parts replacement.
Otherwise, electrical shock or short-circuit accidents could occur.
• Never remove the main cover.
This may cause injury or malfunction of the instrument.
The main cover does not need to be removed for routine
maintenance, inspection and adjustment. Have your Shimadzu
representative perform any repairs requiring removal of the main
cover.
• Replace fuses only with fuses of the proper type and
capacity.
Any other fuses could cause a fire.
• If the power cord plug gets dusty, remove the plug from
the power outlet and wipe away the dust with a dry cloth.
If dust is allowed to accumulate, fire could result.
• Replacement parts must be of the specifications given in
"1.2 Component Parts" or "9.6 Maintenance Parts".
Use of any other parts may result in instrument damage and
malfunction.
• If any water gets onto the instrument, wipe it away
immediately to prevent rust. Never use alcohol or
thinner solvents for cleaning the instrument.
They could cause discoloration.
• Dispose of the waste liquid properly and in accordance
with the instruction by your administrative department.
To Next Page
Loading...
Need help?
General
