Static Electricity Precautions
XV
CBM-20A/20Alite
In Case of Emergency
In Case of Power Outage
WARNING
If any problem is detected, such as a burning smell, take the following action:
Procedure
1 Turn the power to the instrument OFF.
2 Disconnect the power cable at the rear of the instrument.
When the instrument is used again, inspect the instrument and, if necessary, contact your Shimadzu
representative to request servicing.
CAUTION
Take the following measures in the event of a power outage.
Procedure
1 Turn the power to the instrument OFF.
2 After confirming all related items in this section "Installation Precautions" and "Operation
Precautions", use the standard startup procedure to start the instrument.
To Next Page
Loading...
Need help?
General
