Shimadzu CBM-20A - User Levels and Functions

5.9 Managing Groups
5-53
CBM-20A/20Alite
5
5.9.5 User Levels and Functions
Functions that can be used at each user level are as shown in the following table.
 : Available
 : Only the solvent delivery module’s flow rate and autosampler cooler temperature can be set.
Empty : Not available
Item Main functions Administrator Power User Operator
Group
management
Group creation
System name setting
Setting user information

Unit
Configuration
Link Check setting
System Component setting
Operation Mode setting

Analysis
Method editing 
Environment setting in the
"Method Parameter"
window
("Analysis" tab page only)

Sequence editing
Adding to the analysis
queue
Executing and stopping
analysis
Direct control buttons

Stopping analysis registered
by other users, clearing
errors

System check Performing system checks 