Shimadzu CBM-20A User Manual

4.2 Creating Method Files
4-13
CBM-20A/20Alite
4
 "Pump" Tab Page in "Configuration Parameter" Window
, , , and also appear on the tab pages in the
"Configuration Parameter" window and have the same functions. The "Configuration
Parameter" window closes when or is clicked.
4.2.3 Parameters for the Solvent Delivery Module
Enter the solvent delivery module parameters, such as flow rate and minimum/maximum
pressure.
The displayed parameters may vary with the type of solvent delivery module and the pumping
mode set in the "Configuration" tab page in the "Analysis Execution" application window.
For details on the various parameters and the setting ranges, minimum units, units, and default
values for the parameters, refer to "5.12.1 Pump" P. 5-57.
Button Description
Click to display the tab page for that component in the
"Configuration Parameter" window.
(Available in "Analysis" tab page only. In "Editing" tab page, this
button is disable.)
Click to display help on the procedures for setting parameters.
Click to save the parameter settings and close the window.
Click to cancel the setting of parameters and close the window.
Click to save the parameter settings without closing the window.
1
2
3
4
5

Shimadzu CBM-20A Specifications

General

Brand	Shimadzu
Model	CBM-20A
Category	Controller
Language	English