2. Parts Identification and Function
2-32
CBM-20A/20Alite
2.9 Precautions Related to Internet
Explorer Operations
Note the points described below when making settings and performing other operations for
the system controller using Internet Explorer.
Popup Blocker
When pop-up blocker software such as a security software or a toolbar for a browser is
installed in the PC, Internet Explorer may not open the CBM-20A's Web application window.
Please invalidate the pop-up block function for the URLs of the CBM or change the setting of
the PC to disable the pop-up block function. After invalidating the pop-up block function,
delete temporary files by selecting [Tools] - [Internet Options] - [Delete Files] in Internet
Explorer.
Internet Explorer Settings
In order to use Internet Explorer, select [Tools] and [Internet Options] and configure the
following settings. Internet Explorer 6 (IE6) to Internet Explorer 9 (IE9) can be used; note that
some setting items and methods are different.
I [General]
Click the [Settings] button for "Temporary Internet Files" (for IE7, IE8 or IE9, [Settings]
button for "Browsing history") and set the "Amount of disk space to use" (for IE7, IE8 or
IE9, "Disk space to use") to 100 MB. (*1)
II [Security]
(1) Select [Local intranet] and click the [Sites] button. Set the Local Internet zone to
include the system controller URLs. Specifically, add the system controller's URL in the
[Advanced] screen.
Example: http://192.168.*.* or http://192.168.200.99
(To use the system name for access in IE7, IE8 or IE9, add http://"system name".)
(2) Click the [Customize Level] button and configure the following settings.
• Select "Enable" under "Run ActiveX controls and plug-ins" in "ActiveX controls and
plug-ins".
• Select "Enable" under "Script ActiveX controls marked safe for scripting" in "ActiveX
controls and plug-ins".
• Select "Enable" under "Active scripting" in "Scripting".
• Select "Enable" or "Prompt" under "Access data sources across domains" in
"Miscellaneous". (*2)
• Select "Enable" under "File download" in "Downloads". (*3)
III [Security]
Click the [LAN Settings] button and view the "Use a proxy server for your LAN" check box.
If it is checked, configure the following settings. (*4)
• Check the "Bypass proxy server for local addresses" check box.
To Next Page
Loading...
