3.4 Determine the System Configuration
3-7
CBM-20A/20Alite
3
3.4 Determine the System Configuration
Determine the system configuration by setting the pumping mode for the solvent delivery
module and the operation mode for the autosampler.
Also set the operation mode for the fraction collector, if there is one connected.
The system configuration must be set by an Administrator or a Power User.
1
Click the appropriate icon or system name in the [System Name] column on the
"Status" tab page in the "Status Summary" section.
The "Login" window is displayed.
2
Input the user ID in the [User ID] field.
3
Input the password in the [Password] field.
To Next Page
Loading...
