1. Configuration
1-4
CBM-20A/20Alite
• Use commercial products satisfying the specifications given in the remark column.
• One LAN cable is required for every PC, CBM-20A/20Alite, and SPD-M20A/M30A.
• If the total number of PCs, CBM-20A/20Alite System Controllers, and SPD-M20A/M30A
Photodiode Array Detectors is greater than the number of ports on the switching hub,
increase the number of ports as appropriate using cascade connections.
• Before connecting to the network, consult the network administrator of the department or
office where the system will be used.
To Next Page
