Shimadzu CBM-20A - Page 331

8.2 Checking Maintenance Information
8-9
CBM-20A/20Alite
8
8.2 Checking Maintenance Information
Information required for maintenance, such as information on the solvent delivery module
plunger seal, the autosampler needle and rotor seal, and the illumination time of the detector
lamp, can be checked in the "Maintenance" tab page.
8.2.1 Displaying the "Maintenance" Tab Page
Click the [Maintenance] tab in the "Status Summary" section to display the "Maintenance" tab
page.
The message [Collecting maintenance data...] is displayed and the maintenance information
for the systems in the group is displayed in the "Maintenance" tab page.
8.2.2 "Maintenance" Tab Page Display
Details on the items displayed in the "Maintenance" tab page are provided below.
The displayed items vary with the type of solvent delivery module, autosampler, and
detector connected.
For details, refer to "8.2.3 List of Displayed Maintenance Items".
Display item Description
Unit Name Displays the names of the components connected to the system.
Unit Model Displays the model names of the connected components.
Item Displays the maintenance items.
2
1
3
4
5
6
1
2
3