Shimadzu CBM-20A - Page 385

9.5 Specifications
9-49
CBM-20A/20Alite
9
In the case of the Nexera UC series instruments (LC-30ADSF, SFE-30A, and SFC-
30A), operations using Internet Explorer are not guaranteed.
The following component functions cannot be used when controlling the system controller
from Internet Explorer.
Control of autosampler Setting items
• Sample injection
volume
• Number of repeated
analyses
• Analysis time
analysis-file number
• Sample injection
volume
• Number of repeated
analyses
• Analysis method
Control of column
oven
Setting items
• Oven temperature
• Maximum
temperature
• Oven temperature
•Maximum
temperature
Control of detector Setting items
• Detector
wavelength
• Time constant
• Lamp replacement
etc.
• Detector wavelength
• Recorder range
•Polarity
• Time constant
• Scan
etc.
Control of fraction
collector
Setting items
• Fractionation
conditions
• Peak-detection
conditions
• Analysis conditions
etc.
• Fractionation
conditions
• Peak-detection
conditions
• Analysis conditions
etc.
Component Restricted item
Solvent delivery
module
• Control based on constant pressure
• Compressibility setting (See note 1.)
Autosampler
• Creation of pretreatment files (Operation is based on standard injection
conditions.)
• Stat analysis
• Reagent vials for SIL-10ADvp and Reagent rack for SIL-10A series
Detector
• Executing and displaying data for spectral scans
UV/UV-VIS detector (SPD):
• REC MODE setting and output of ratio-chromatogram signal
(See note 2.)
• RANGE setting and output of recorder signal (See note 3.)
• POLARITY setting (See note 4.)
Fluorometric detector (RF-20A/20Axs)
• ANALOG 1 MODE and ALALOG 2 MODE settings and output of
recorder signal (see note 5.)
• 3-wavelength mode and 4-wavelength mode settings and data display
Item
Control
Internet Explorer LC Workstation