SICK DUSTHUNTER T100

83
8012428/YWL2/3-0/2016-08| SICK O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER T
Subject to change without notice
START-UP AND PARAMETER SETTINGS 4
4.4.9 Starting measurement mode
Set the measuring system to “Measurement” mode after entering/modifying parameters.
To do so, cancel “Maintenance”: Deselect “Maintenance sensor”.
Fig. 55: SOPAS ET menu: MCU/Maintenance/Maintenance
Standard start-up is now completed.