6 Other Functions
49
6.5.3 Password setting
The key lock function requires a password.
Set and change the password in the PASSWORD SETTING screen.
Pressing the [PASSWORD SETTING] button in the MENU 5/5 (SYSTEM menu) screen will
display the PASSWORD SETTING screen.
Fig. 43 PASSWORD SETTING screen (current password request)
1. According to the message on the screen, input the password currently set.
The screen to input a new password will appear.
Note
The password at shipment is set to “0000.”
Pressing each key allows the corresponding operation as follows:
Fig. 44 PASSWORD SETTING screen (new password request)
CANCEL Returns to the MENU 5/5 (SYSTEM menu) screen without changing the setting.
CLEAR The value input to the editing area is cleared.
BACK The last digit input is cleared.
SET Returns to the MENU 5/5 (SYSTEM menu) screen with the setting changed.
To Next Page
Loading...
Need help?
General
