SICK DUSTHUNTER T100

10 Optional Functions
98
2. Pressing the button which setting is to be changed will reverse the value display.
Change the value by the [T] and [S] button and press the [SET] key.
3. The setting is changed, and the screen returns to the PURGE SET screen.
Note
The recommended purge interval is 1 minute. When the above recommended time does not meet the
actual condition, change the setting after confirmation.
Q Delay time
Sets the purge delay time.
1. Pressing the button at the right of [DELAY TIME] in the PURGE SET screen
displays the PURGE DELAY TIME screen.
Fig. 73 PURGE DELAY TIME screen
2. Pressing the button which setting is to be changed will reverse the value display.
Change the value by [T] and [S] button and press the [SET] key.
3. The setting is changed, and the screen returns to the PURGE SET screen.
Note
The purge delay time depends on the tube length. Set the time by actually measure the tube length.
Setting item Setting range
Minute 0 to 10
Setting item Setting range
Minute 0 to 15