8
8012428/YWL2/3-0/2016-08| SICKO P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER T
Subject to change without notice
1 IMPORTANT INFORMATION
1.2 Symbols and document conventions
1.2.1 Warning Symbols
1.2.2 Warning levels and signal words
DANGER
Risk or hazardous situation which will result in severe personal injury or death.
WARNING
Risk or hazardous situation which could result in severe personal injury or death.
CAUTION
Hazard or unsafe practice which could result in less severe or minor injuries.
NOTICE
Hazard which could result in property damage.
1.2.3 Information symbols
1.3 Intended use
Purpose of the device
The DUSTHUNTER T measuring system only serves continuous measurement of dust con-
centrations in exhaust gas and exhaust air plants.
Correct use
▸ Use the device only as described in these Operating Instructions. The manufacturer
bears no responsibility for any other use.
▸ Observe all measures necessary for conservation of value, e.g., for maintenance and
inspection and/or transport and storage.
● Do not remove, add or modify any components to or on the device unless described and
specified in the official manufacturer information. Otherwise
– the device could become dangerous
– the manufacturer’s warranty becomes void
Restrictions of use
● The DUSTHUNTER T measuring system is not approved for use in potentially explosive
atmospheres.
Symbol Significance
Hazard (general)
Hazard by voltage
Symbol Significance
Important technical information for this product
Important information on electric or electronic functions
To Next Page
Loading...
Need help?
General
