76
8012428/YWL2/3-0/2016-08| SICKO P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER T
Subject to change without notice
4 START-UP AND PARAMETER SETTINGS
4.4.4 Setting the analog outputs parameters
Select the “Configuration / IO Configuration / Output Parameters” directory to set the
analog outputs.
Fig. 51: SOPAS ET menu: MCU/Configuration/IO configuration/Output Parameters
● Default values see “Factory settings”, page 74
● In order to output the dust concentration under standard conditions (“Conc. s.c.”
(Ext)), set the parameters for the analog outputs according to see “Setting the analog
inputs parameters”, page 78.
To Next Page
Loading...
Need help?
General
