SICK S300 Mini User Manual

•
T
he safety laser scanner must be arranged and configured in such a manner that
it can detect objects entering into the hazardous area.
•
The optical path of the safety laser scanner must be kept clear at all times and
must also not be obscured by transparent objects such as protective screens, plex‐
iglass, lenses, etc. The protective function of the safety laser scanner can only be
guaranteed if the contamination measurement function is not circumvented by
such measures.
Further topics
•
"Mount
ing", page 58
•
"Commissioning", page 93
3.2 Product characteristics
3.2.1 Specific features
•
C
ompact design
•
270° scanning angle
•
Increased dust and particle tolerance due to dazzle and particle algorithms
•
Variants with a scanning range up to 1 m
1)
, 2 m or 3 m (maximum radii of the
protective field)
•
Configuration via PC or notebook using the SICK Configuration & Diagnostic soft‐
ware
•
Field sets comprising one protective field and up to 2 warning fields
•
Contour monitoring of the protective field if using only one warning field
S300 Mini Standard
•
Stand-alone operation only
•
1 field set
•
1 monitoring case
•
Integrated external device monitoring (EDM)
•
Integrated configurable restart interlock/restart delay
•
2 universal I/O connections
S300 Mini Remote
•
Only in conjunction with a safety controller, safety laser scanner or gateway. The
following functions can only be configured/installed on the higher-level device:
°
Switching off the dangerous movement of a machine, a system or a vehicle
°
Restart interlock
°
EDM
•
Secure bus connection via Enhanced Function Interface (EFI) for operation in a
system network with other safety laser scanners, with products in the sens:Control
product group, or with a Flexi Soft safety controller
•
Up to 16 field sets
•
Up to 32 monitoring cases
3.2.2 Device overview
The safety laser scanner comprises 3 components:
•
T
he sensor with the opto-electronic detection system, the LEDs, the 7-segment dis‐
play, and the connecting cable with the electrical connections
•
The optics cover with the light emission window
•
The connecting cable with round plug connector. The round plug connector has all
the electrical connections except for the configuration interface.
1)
S300 Mini St
andard only.
PRODUCT DESCRIPTION 3
8014170/ZA23/2019-11-14 | SICK O P E R A T I N G I N S T R U C T I O N S | S300 Mini
15
Subject to change without notice

SICK S300 Mini Specifications

General

Brand	SICK
Model	S300 Mini
Category	Scanner
Language	English