Area of responsibility Target group Specific chapters of these operating instruc‐
t
ions
1)
Manufacturer Project developers
(planners, developers,
designers)
"Project planning", page 29
"Configuration", page 69
"Technical data", page 108
"Accessories", page 123
Installers "Mounting", page 58
Electricians "Electrical installation", page 64
Safety experts "Project planning", page 29
"C
onfiguration", page 69
"Commissioning", page 93
"Technical data", page 108
"Checklist for initial commissioning and com‐
missioning", page 133
Operating entity Operators "Troubleshooting", page 101
Maintenance person‐
ne
l
"Maintenance", page 96
"Troubleshooting", page 101
"Accessories", page 123
1)
Chapters not listed here are intended for all target groups. All target groups must follow all of the safety
and warning instructions in all chapters of the operating instructions!
In other applications, the operating organization is also the manufacturer of the equip‐
ment w
ith the corresponding allocation of the target groups.
1.4 Further information
www.sick.com
T
he following information is available via the Internet:
•
This document in other languages
•
Data sheets and application examples
•
CAD files and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
•
Guide for Safe Machinery. Six steps to a safe machine
•
CDS (Configuration & Diagnostic Software)
1.5 Symbols and document conventions
The following symbols and conventions are used in this document:
Safety notes and other notes
DANGER
Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.
WARNING
Indic
ates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.
CAUTION
Indic
ates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.
1 ABOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | S300 Mini 8014170/ZA23/2019-11-14 | SICK
Subject to change without notice