Siemens MAG 5000 User Manual

67
SITRANS F M
8. Commissioning
'LJLWDORXWSXW
5HOD\RXWSXW
(UURUOHYHO
(UURUOHYHO
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQ/LPLW

2II
8.4.3
Digital and relay outputs
Error level
Error number
(UURUQXPEHU
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQOLPLW

2II
(UURUQXPEHU
'LJLWDORXWSXW
5HOD\RXWSXW
Current output
O
Current output
Time const.
Current output
Current output
Unidirectional
Alarm
Unidirectional
Bidirectional
On
O
'LJLWDORXWSXW
)UHTXHQF\
)UHTXHQF\RXWSXW
8QLGLUHFWLRQDO
8QLGLUHFWLRQDO
%LGLUHFWLRQDO
)UHTXHQF\RXWSXW
)PD[
)UHTXHQF\RXWSXW
7LPHFRQVW
3XOVH
)UHTXHQF\
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQOLPLW
%DWFK
2II
8.4.2
Outputs
Digital output
Frequency
Proportional to flowrate
(Terminals 56, 57, and 58)
The current output must be set off when not used.
Current output
Proportional to flowrate
(Terminals 31 and 32)
4 - 20 mA + alarm:
Current output gives the following mA, depending on what is selected as error level in basic settings.
Fatal: 1.3 mA, permanent: 2 mA, warning: 3 mA
Digital output
Pulse/volume
(Terminals 56, 57, and 58)
Menu detail
'LJLWDORXWSXW
3XOVH
3XOVH
)UHTXHQF\

2II
9ROXPHSXOVH
3XOVHRXWSXW
8QLGLUHFWLRQDO
8QLGLUHFWLRQDO
%LGLUHFWLRQDO
3XOVHZLGWK
3XOVHRXWSXW
WLPHFRQVW
3XOVHSRODULW\
3RVLWLYH
3RVLWLYH
1HJDWLYH
1) Not at batch
1) Not at batch

Siemens MAG 5000 Specifications

General

Type	Electromagnetic Flowmeter
Protection Class	IP67
Material	Stainless Steel, Carbon Steel
Power Supply	24 V DC, 100-240 V AC
Accuracy	±0.2% of flow rate
Communication	HART, PROFIBUS, Modbus
Enclosure Rating	IP67
Ambient Temperature Range	-20°C to +60°C
Sizes	DN 2 to DN 3000
Lining Materials	PTFE, Hard Rubber
Electrode Materials	Stainless Steel, Hastelloy, Tantalum
Process Temperature	-40 to +180 °C (-40 to +356 °F) depending on liner
Process Pressure	Up to 40 bar (580 psi)
Approvals	ATEX, FM, CSA, IECEx
Flow Velocity Range	0 to 12 m/s
Output Signals	4-20 mA, Pulse, Frequency