17
SITRANS F M
2. Technical data MAG 5000 and MAG 6000
2.4 Sensor MAG 5100 W (continued)
Technical specifications EPDM or NBR lining (Order No. 7ME6520) Ebonite lining (Order No. 7ME6580)
Product characteristic: Targeted towards the EU water markets and Targeted towards the Non EU water markets
low flow applications:
Design
Material
• Housing and flanges Carbon steel, with corrosionresistant Carbon steel ASTM A 105, with corrosionresistant
two-component epoxy coating two-component epoxy coating
(min. 150 μm) (min. 150 μm)
• Corrosivity category Corrosivity category C4, according to ISO 12944-2 Corrosivity category C4, according to ISO 12944-2
• Measuring pipe AISI 304 (1.4301) (DN 50 ... DN 300 (2" ... 12") AISI 304 (1.4301)
Carbon steel)
• Electrode Hastelloy Hastelloy
• Grounding electrode Hastelloy Hastelloy
• Terminal box Fibre glass reinforced polyamide Fibre glass reinforced polyamide
Certificates and approvals
Certificates Custody Transfer (only together with MAG
5000/6000 CT)
OIML R 49 pattern approval cold water (Denmark
and Germany): DN 50 ... 300 (2" ... 12")
(For further details see approval :
08-3412 TS 22.36 005 or PTB 6.221/05.21)
MI 001 cold water (EU): DN 50 ... 300 (2" ... 12")
(For further details see approval : DK-0200-MI001-001)
Drinking water approvals EPDM: NSF/ANSI Standard 61 (Cold water, US) (pending)
NSF/ANSI Standard 61 (Cold water, US) WRAS (WRc, BS6920 cold water, GB)
WRAS (WRc, BS6920 cold water, GB)
ACS listed (F),
DVGW W270 (D)
Belgaqua (B)
MCert
NBR:
NSF/ANSI Standard 61 (Cold water, US, only
ANSI B16.5 flanges)
MCert
Approvals PED – 97/23 EC1), CRN PED – 97/23 EC (only < DN 600 (< 24"))
FM Class 1, Div 2 FM Class 1, Div 2 (pending)
1)
For sizes larger than 600 mm (24”) in PN 16, PED conformity is available as a cost-added option. The basic unit will carry the LVD (Low Voltage Directive) and
EMC approvals.
To Next Page
Loading...
