7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL Page 159
mmmmm
Parameters
P322 LCD Total Low [MR 200]
View and/or alter the four least significant digits of the totalizer value.
P323 LCD Total High [MR 200]
View and/or alter the four most significant digits of the totalizer value.
Profile Records (P330 to P337)
These features can record up to ten Echo profiles, initiated manually (P330), or
automatically (P331 et al). If ten Profiles are already saved, addresses 1 through 10 are
filled, the oldest automatically initiated record is overwritten. Manually initiated records
are not automatically overwritten. All records are automatically deleted in the event of a
power interruption.
When a record is displayed, results are based on current programming (which may have
been altered since the record was saved). This permits the effect on the echo profile to be
observed when changing an echo parameter.
Primary Index
Single Point Model Dual Point Model
Global Transducer
Values Range: 0.000 to 9999
Related
• P630 LCD Totalized Multiplier
• P633 LCD Totalized Decimal Position
• P737 Primary Reading
Primary Index
Single Point Model Dual Point Model
Global Transducer
Values Range: 0.000 to 9999
Related
• P630 LCD Totalized Multiplier
• P633 LCD Totalized Decimal Position
• P737 Primary Reading
WARNING:
These parameters are for authorized service personnel or technicians familiar
with Siemens Milltronics echo processing techniques.
To Next Page
Loading...
