Siemens MAG 5000 User Manual

68
SITRANS F M
8. Commissioning
5HOD\
'LJLWDORXWSXW
%DWFK
3XOVH
)UHTXHQF\
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQOLPLW
2II
%DWFKTXDQWLW\ %DWFKFRPS
%DWFKWLPHHUURU
2II
2II
2Q
%DWFKRYHUUXQHUU
2II
2II
2Q
%DWFKRYHUUXQHUU
%DWFKFRXQWHU
'RZQ
8S
'RZQ
%DWFK
7LPHFRQVW
0D[EDWFKWLPH
5HOD\RXWSXW
&OHDQLQJ
(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQ/LPLW
&OHDQLQJ
&OHDQLQJ
2II
&OHDQLQJ
F\FOHWLPH
'LJLWDORXWSXW
5HOD\RXWSXW
'LUHFWLRQOLPLW

(UURUOHYHO
(UURUQXPEHU
'LUHFWLRQOLPLW

2II
/LPLWPRGH
VHWSRLQW
VHWSRLQW
VHWSRLQWV
/LPLWVHWSRLQW
/LPLWVHWSRLQW
PLQLPXP
/LPLWVHWSRLQW
PD[LPXP
+\VWHUHVLV
Menu detail
Limit/direction
Limit switches are available for both digital and relay outputs.
Direction mode: 1 set point at 0% flow; hysteresis 5%.
If 2 set points must activate 2 separate outputs, a single set point has to be selected individually for
digital as well as relay outputs.
Batch
(MAG 6000 only) Non CT
(Possible through relay and
digital output)
8.4.4
Relay outputs
Cleaning
7RWDOL]HUUHVHW
7RWDOL]HU
)RUFHRXWSXW
7RWDOL]HU
7RWDOL]HU
7RWDOL]HU
([WHUQDOLQSXW
2II
6WDUWEDWFK
+ROGFRQWLQXH
6WRSEDWFK
7RWDOL]HUUHVHW
)RUFHRXWSXW
)UHH]HRXWSXW
4PD[QLJKW
0DQXDOFOHDQLQJ
2II
([WHUQDOLQSXW
8.4.5
External input
Non CT versions only
Batch control is available on MAG 6000 only.
The relay output must always be used to operate the cleaning unit when a cleaning unit has been
installed together with the transmitter. The relay output cannot be used for other purposes.
Note
When batch function is on relay - the pulse/frequency output is not possible.

Siemens MAG 5000 Specifications

General

Type	Electromagnetic Flowmeter
Protection Class	IP67
Material	Stainless Steel, Carbon Steel
Power Supply	24 V DC, 100-240 V AC
Accuracy	±0.2% of flow rate
Communication	HART, PROFIBUS, Modbus
Enclosure Rating	IP67
Ambient Temperature Range	-20°C to +60°C
Sizes	DN 2 to DN 3000
Lining Materials	PTFE, Hard Rubber
Electrode Materials	Stainless Steel, Hastelloy, Tantalum
Process Temperature	-40 to +180 °C (-40 to +356 °F) depending on liner
Process Pressure	Up to 40 bar (580 psi)
Approvals	ATEX, FM, CSA, IECEx
Flow Velocity Range	0 to 12 m/s
Output Signals	4-20 mA, Pulse, Frequency