Communication / PROFIBUS 09.2008
6SE7087-6QX70 (Version AK) Siemens AG
8.2-42 Compendium Motion Control SIMOVERT MASTERDRIVES
Error
number
Meaning Use Additional
info
0x15 Response too long
The length of the current response
exceeds the maximum transferable
length
0x16
Non-permissible parameter
address
Non-permissible or non-supported value
for attribute, number of elements,
parameter number or subindex or a
combination
0x17 Non-permissible format
Write task: non-permissible or non-
supported parameter data format
0x18
Number of values not
consistent
Write task: Number of values of the
parameter data do not correspond with
the number of elements in the parameter
address
...
bis 0x64 Reserved - -
0x65...0xFF
Manufacturer-specific (see also
8.2.10.6 "CBP2 diagnostic
parameters", PKW error
numbers)
- -
Table 8.2-8 Error numbers in DPV1 parameter responses
To Next Page
Loading...
Need help?
General