09.2008 Communication / PROFIBUS
Siemens AG 6SE7087-6QX70 (Version AK)
SIMOVERT MASTERDRIVES Compendium Motion Control 8.2-127
Counter DS_WRITE acknowledgement negatively
Reserved
Counter DS_WRITE acknowledged positively
Reserved
Counter DS_READ acknowledged negatively
Reserved
Counter DS_READ acknowledged positively
reserved
Counter GET DB99 acknowledged positively
Counter PUT DB99 acknowledged positively
Counter GET DB100 acknowledged positively
Counter PUT DB100 acknowledged positively
Counter GET DB101 acknowledged positively
Counter PUT DB101 acknowledged positively
Counter DPT-Service acknowledged negatively
Counter Applic. acknowledged positively
Increment during DPT service "Set-up application relation"
reserved
reserved
Creation date
Day and month when CBP firmware created
(Display: 0304 = 03.04.)
Creation data
Year when CBP firmware created (Display = Year)
Software-Version
Software version V X.YZ (Display X)
Software-Version
Software version V X.YZ (Display YZ)
Flash-EPROM Checksum
Is read out of the flash EPROM during run-up
r732.16
(Low-Byte), 0AEH
r732.16
(High-Byte), 0AFH
r732.17
(Low-Byte), 0B0H
r732.17
(High-Byte), 0B1H
r732.18
(Low-Byte), 0B2H
r732.18
(High-Byte), 0B3H
r732.19
(Low-Byte), 0B4H
r732.19
(High-Byte), 0B5H
r732.20
(Low-Byte), 0B6H
r732.20
(High-Byte), 0B7H
r732.21
(Low-Byte), 0B8H
r732.21
(High-Byte), 0B9H
r732.22
(Low-Byte), 0BAH
r732.22
(High-Byte), 0BBH
r732.23
(Low-Byte), 0BCH
r732.23
(High-Byte), 0BDH
r732.24
(Low-Byte), 0BEH
r732.24
(High-Byte), 0BFH
r732.25
0C0H and 0C1H
r732.26
0C2H and 0C3H
r732.27
0C4H and 0C5H
r732.28
0C6H and 0C7H
r732.29
0C8H and 0C9H
To Next Page
Loading...
Need help?
General