10.2004 Guidelines for Start-Up
Siemens AG 6SE7087-6QX70 (Version AD)
SIMOVERT MASTERDRIVES Motion Control Compendium 3
2.) Parameterization of the F01 technology option (if present) during initial start-up
After completing "parameterization of the basic unit during initial start-up" (Point 1), you can
parameterize the F01 technology option.
First read the sections you need for your application in Section 9 "Technology F01" of the
Compendium and, at the same time, refer to the function diagrams for the F01
technology option in the appendix (Volume 2) of the Compendium.
Please pay special attention to pages [799], [800], [802] and [850] in the function diagrams
for the F01 technology option.
If you are interested in more detailed information on the technology functions (especially if
SIMATIC S7 / GMC-BASIC / GMC-OP_OAM / M7 are used), you can find relevant details in
the "Motion Control planning package for MASTERDRIVES MC and SIMATIC S7" (manual /
CD-ROM can be ordered separately).
Here, you can also find detailed descriptions of the technology-specific fault messages of
the unit for job management, AUTOMATIC BLOCK (U591), and the GMC-FBs) in "Appendix
A".
3.) Parameterization of the unit by means of downloading if data backup is provided:
The parameter settings to be entered for your application are available, stored in the OP1S
or as a DriveMonitor file.
3.1) Start-up if data protection provided:
a.) Parameter set stored in the OP1S:
Download by means of OP1S
See Sections 6.3.2 and 5.4
b.) Parameter set available as a DriveMonitor file:
Download by means of DriveMonitor
See Section 6.3.2 or on-line help of DriveMonitor
♦ ANNEX (tips on information in the internet):
Information and software in the INTERNET relating to SIMOVERT MASTERDRIVES:
• In the INTERNET, you can find the following: software releases (DOWNLOAD of current
firmware for the units), additions and alterations to the manuals / Compendium,
frequently asked questions, service contact points, a HOTLINE and so on.
Contents located under:
SIEMENS / Products & Solutions / Product index / Variable-speed drives /
MASTERDRIVES MC / contact partner / A&D Automation and Drives /
Support, Training & Services / Customer Support / Variable-Speed drive Systems
To Next Page
Loading...
Need help?
General