Siemens SINAMICS S120 - Page 381

Appendix
A.3 Temperature sensors for SINAMICS components
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
381
Component
Interface
Pin
Signal name
Technical specifications
Basic Line Module
Booksize
X21 (terminal)
1
2
+Temp
-Temp
Basic Line Module temperature
sensor Temperature switch type:
bimetallic switch with NC contact
Chassis
X41 (terminal)
4
3
+Temp
-Temp
Motor Module
Booksize
X21/X22 (terminal)
1
2
+Temp
-Temp
Temperature sensor
KTY84–1C130/PTC/PT1000
Bimetallic switch with NC contact:
Alarm and timer (only for tempera-
ture evaluation via MM)
PT100 temperature sensor (only
applies to chassis)
The following ap-
plies to chassis:
X41 (terminal)
4
3
+Temp
-Temp
1)
Cable for connection to direct measurement systems: Article number 6FX.002-2CB54-....
Detailed information on how to configure these temperature sensors in Startdrive is given in
the Startdrive online help.