Commissioning
4.4 Creating a project offline in Startdrive
Commissioning with Startdrive
84 Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Opening an existing project
If you wish to change the data of an existing project, then you can load this project at any
time.
1. Click "Open existing project" in the secondary navigation in the portal view of Startdrive.
A selection of the projects last used is displayed to the right in the detailed view.
Figure 4-3 Opening an existing project
2. Select the required project from the list, and then click "Open".
- or -
To Next Page
Loading...
