Siemens SINAMICS S200 - Page 520

Property Description
Holding brake Optional integrated holding brake
Connection
• 1FL2102, 1FL2☐03, 1FL2104, 1FL2204:dual-cable connections with a
h
ybrid connector
• 1FL2☐05:tw
o-cable connections with two angular connectors
• 1FL23☐☐:three-cable connections with three angular connectors
13.2.2 Permissible environmental conditions for the motor
Technical data
Table 13-12
Environmental conditions for transport
Environmental conditions for transport in the transport packaging according to Class 2K3 to DINENIEC60721‑3‑2,
e
xcept for en
vironmental variables "air temperature" and "condensation"
Climatic environmental conditions
• Temperature: ‑15°C … +70°C
• Highest relative
humidity: < 90% at 30 °C, condensation not permissible
Mechanical environmental conditions Single shocks (6ms), max. 300 m/s²
Protection against chemical substances Protected according to Class 2C2
Biological environmental conditions Suitable according to Class 2B2
Table 13-13 Environmental conditions for long-term storage
Environmental conditions for long-term storage in the product packaging according to Class 1K3 to
DINENIEC60721‑3‑1, e
xcept for en
vironmental variables "air temperature", "highest relative humidity" and "conden‐
sation"
Climatic environmental conditions

• Temperature: -20°C...+65°C
• Highest relative
humidity: < 90% at 30 °C, condensation not permissible
Mechanical environmental conditions Vibration-free storage space, v
rms
< 0.2 mm/s
Protection against chemical substances Protected according to Class 1C2
Biological environmental conditions Suitable according to Class 1B2
Duration
• Six months for the above-mentioned conditions.
•
Special preservation measur
es are required for storage periods of six
months up to a maximum of two years.
For more information, please contact your local sales partner.
Technical data
13.2Technical data of the motor
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
518 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA